The module allows you to view, edit, compare firmware files for MAN vehicles with Bosch MD1CE100 control unit. It is possible to open and edit firmware files ONLY in *.bin format.
Contains over 200 basic calibrations. Calibrations for torque limit, injection quantity, injection phase, fuel pressure, emergency modes, creep mode, SCR, DPF, EGR calibrations, DTC error mask, etc. are available.
The module does not correct the checksums of the COP in the firmware. Reading and writing firmware to the ECU is recommended using the Autovei Truck Explorer, Bitbox, Dimsport Trasdata programmer.
The specified programmers are automatically correct the COP before writing to the control unit.
Available SW:
P1629_3_10_6
P1629_3_10_7
P1629_392_100